Keeping your dog safe at home doesn’t have to be complicated. With the Snagle Paw Expandable & Retractable Door Barrier, you can create safe boundaries around your front door, back door, or stairway — all without sacrificing your home’s style or your pet’s comfort.
This step-by-step guide walks you through how to install your barrier properly for maximum safety and long-lasting performance.
🧰 Before You Start: What You’ll Need
Before installation, make sure you have the following tools and accessories ready:
Included in your Snagle Paw Kit:
- Mounting Brackets (x4)
- Screws (x8)
- Adhesive Tabs (optional for non-drill installation)
- Main Retractable Barrier
You’ll also need:
- Measuring tape
- Pencil or marker
- Screwdriver or drill
- Level
🔧 Step-by-Step Installation Guide
Step 1: Measure & Mark Your Mounting Points
Start by identifying where you want to install your barrier — front door, back door, or stairway.
Use a measuring tape to ensure both sides are level and at the same height.
💡 Tip: The barrier should be mounted about 1 inch above the floor to prevent dragging.
Step 2: Install the Frame-Mounted Brackets
Attach two mounting brackets to the wall or door frame using the provided screws.
If you prefer not to drill, you can use the 3M adhesive pads — just make sure the surface is clean and dry before sticking.
⚠️ Note: Adhesive installation is best for smooth, flat surfaces like metal or PVC. Avoid uneven or textured walls.
Step 3: Attach the Door-Mounted Brackets
Next, secure the two brackets on the door side or opposite wall where the gate will hook.
Align them carefully with the wall-side brackets so the gate locks securely when extended.
Step 4: Connect & Adjust the Barrier
Slide the retractable barrier into the wall-side brackets, then extend it across to hook into the door-side mounts.
Once the gate is latched, check that it rolls smoothly and locks firmly.
✅ Check: The gate should retract evenly without sticking, and the latch should click securely.
Step 5: Final Safety Check
Before regular use, give your setup a gentle shake to ensure everything feels stable.
Make sure screws or adhesive pads are firmly secured, and that the barrier’s bottom edge clears the floor.
🦴 Pro Tip: Allow adhesive installations to cure for at least 24 hours before full use for maximum bonding strength.
💡 Helpful Tips & Troubleshooting
- If the gate doesn’t retract smoothly, ensure the brackets are level and parallel.
- For uneven surfaces, use spacers or washers behind brackets to keep them aligned.
- Always test the locking mechanism before leaving your dog unsupervised.
🏠 Works Perfectly For:
- 🚪 Front Doors — Prevent your pup from rushing to greet visitors.
- 🪟 Back Doors — Keep airflow while keeping pets safe.
- 🪜 Stairways — Protect puppies and senior dogs from falls.
🧼 Maintenance & Safety Reminders
- Wipe the barrier regularly with a soft cloth to remove dust or pet hair.
- Check brackets monthly to ensure they remain tight and secure.
- Do not expose the barrier to continuous outdoor moisture or direct sunlight.
🐾 Final Thoughts
Installing your Snagle Paw Expandable & Retractable Door Barrier is quick, simple, and worth every minute — giving your dog freedom within safe boundaries while keeping your home calm and organized.
If you’re ready to create a safer space for your furry friend, explore our full collection.
Need help or want to share your setup?
📩 Contact us: info@snaglepaw.com
📱 Follow us on social media